Carlsbad:(760) 415-8742
Encinitas:(760) 415-5996
Fax: (760) 635-3854
List price (MSRP): $279.00 (each)
|
The center channel is the most important component of a surround sound system, but it is often overlooked. In fact, it produces more than 60 percent of all soundtrack materials. Klipsch certainly gives the new RC-25 center channel the attention it deserves by incorporating new features that enhance performance and installation flexibility. This detailed performer establishes a new value price point in the Reference Series line by continuing to offer phenomenal sound and stylish flair, but at an even more affordable price.
The RC-25 delivers precise, subtle and exhilarating sounds through dual 5.25-inch woofers and a 1-inch tweeter that has a light titanium-dome diaphragm and a high-energy, video-shielded Neodymium magnet. The tweeter is coupled to an exclusive Klipsch square Tractrix® Horn that boosts the driver’s already high sensitivity while minimizing room interactions that cause loss of sonic detail.
Klipsch’s Tapered-Array™ Technology, a 2.5-way design, minimizes the acoustical interference between drivers that plagues most horizontal center-channel speakers. This technology allows both woofers to create intense bass, while only one works with the tweeter to produce the midrange. The result is a smooth, clear sound not just directly in front of the speaker, but off to the sides as well, where conventional center speakers often exaggerate or mask sounds.
The woofers feature an enhanced version of Klipsch’s distinctive, copper-colored Cerametallic™ material that is stronger than ever. These cones are made of an anodized aluminum that makes them tough but does not detract from their elegance. The anodizing process converts their inner and outer surface to ceramic. The result is a rigid cone with outstanding damping characteristics that will not flex or resonate at frequencies within the woofer’s operating range. Driving these cones are large, video-shielded magnets and high-temperature, long-excursion voice coils, for high efficiency and deep, powerful, articulate bass without breakup or distortion.
The RC-25 has dual front ports for improved bass response and ease of cabinet installation. It also incorporates an up and down tilt feature to accommodate a variety of placement options.
The RC-25 achieves a sleek and stylish look because of its black wood grain vinyl veneer and new sculpted low-diffraction baffle with an integrated horn. The RC-25’s appearance gets even better with new magnetically attached grilles, which are easier to handle and more durable.
The RC-25 reproduces detailed, subtle and dynamic sounds that allow listeners to hear the passion that the filmmakers and artists originally intended. This center channel is also timbre-matched to the entire range of Reference speakers.
 |
| FREQUENCY RESPONSE: 69Hz-20kHz±3dB |
| SENSITIVITY: 95dB @ 2.83 volts/1 meter |
| POWER HANDLING: 125 watts maximum continuous (500 watts peak) |
| NOMINAL IMPEDANCE: 8 ohms compatible |
| ENCLOSURE TYPE: Bass reflex via dual front-mounted ports |
| DRIVE COMPONENTS: Tapered Array™ system using one 1" (2.54cm) magnetically shielded, titanium dome compression driver tweeter with a 5" (12.7cm) square 90° x 60° Tractrix® Horn and two 5.25" (13.34cm) magnetically shielded, aluminum cone woofers |
| TWEETER: K-130-DN 1" (2.54cm) Titanium dome compression driver |
| HIGH FREQUENCY HORN: 5" square 90° x 60° Tractrix® Horn |
| HF CROSSOVER: 2250Hz |
| MF CROSSOVER: 250Hz |
| WOOFER: Two K-1127-OV 5.25" (13.34cm) Cerametallic® cone / cast polymer frame |
| DIMENSIONS: 6.5" (16.5cm) x 20.5" (52.1cm) x 9" (22.9cm) |
| WEIGHT: 19 lbs. (8.6kg) |
| ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF) |
| FINISHES: Black Ash woodgrain vinyl |
| FEATURES: Uptilt and Downtilt Foot |
| YEARS BUILT: 2003 - |