Reference Series powered subwoofers shatter your expectations for deep, driving bass by playing louder and going deeper than significantly larger designs, creating the most dramatic, intense bass you've ever heard or felt. Designed from the ground up for class-leading, room-filling low-frequency performance, the RSW-12 is sonically, cosmetically and technologically matched to the Reference Series. Low-level inputs that also operate as an LFE input (for compatibility with 5.1 digital sound formats) and an adjustable low-pass crossover allow you to configure the subwoofer to your room's acoustics. The easy-to-reach, side-mounted volume control makes for simple setup and convenient level adjustments between music and movie sources.
The RSW-12 delivers truly deep, musical low bass with depth and intensity that intimidates much larger subwoofers. It matches a 12" rear-firing active driver to a high-output BASH® amplifier to provide enough power and low-distortion performance to complement our floorstanding speakers. It is available in wood-grain black vinyl. | FREQUENCY RESPONSE: | 22-120Hz±3dB | | MAXIMUM ACOUSTIC OUTPUT: | 119dB @ 30Hz 1/8 space, 1 meter | | ENCLOSURE TYPE: | Bass reflex via passive radiator | | AMPLIFIER: | BASH® digital hybrid | | AMPLIFIER POWER: | FTC Rated Power: 625 watts continuous, 35-110Hz @ ≤ 1% THD Dynamic Power*: 2400 watts @ ≤ 1% THD *Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today's digital music and movie formats. In addition to the required FTC power rating, we've provided the dynamic power rating as a better indication of the product's true performance. | | AUTO POWER ON: | 2 second ON delay, 15 minute OFF delay | | LOW PASS CROSSOVER: | Continuously variable from 40-120Hz, 36dB/octave slope above 120Hz | | INPUTS: | 2) Line level RCA phono jacks, Lowpass Enable / Disable switch for LFE mode | | OUTPUTS: | 2) Line level RCA phono jacks (unfiltered) | | PHASE: | Switchable 0 or 180 degrees | | DRIVE COMPONENTS: | Subwoofer system using one 12" (30.48cm) rear-firing, aluminum cone woofer and one 12" (30.48cm) front-firing, aluminum cone passive radiator | | WOOFER: | K-1113-T 12" (30.48cm) Cerametallic® cone, cast aluminum frame active / KD-124-T 12" (30.48cm) Cerametallic® cone, cast aluminum frame passive | | DIMENSIONS (H x W x D): | 16.2" (41.1cm) x 15.6" (39.6cm) x 22.75" (57.8cm) | | WEIGHT: | 58 lbs. (26.3kg) | | ENCLOSURE MATERIAL: | Medium density fiberboard construction (MDF) | | FINISHES: | Black ash vinyl veneer | | VOLTAGE: | 110/120 VAC 60Hz | | EXPORT VOLTAGE: | 230 VAC 50/60Hz | | YEARS BUILT: | 2001 - |
|
Per our agreement with our suppliers, Dream Home Cinema does NOT sell products over the Internet, over the phone, by mail, or telemarketing. These pages are intended as a courtesy to our customers, to provide them with all possible information regarding the products we install for them. The products featured on our web-site are for Face to Face sales only and cannot be purchased independent of the installation. |