KEY FEATURES AND BENEFITS
Very high quality phono stage.
MM and MC phono stage with very low noise, accurate RIAA, wide overload margin and great sound quality.
Dual mono.
Better transient response and imaging. Also greater depth of field.
Dual choke regulation.
Incredibly quiet power supply, allowing the circuit to operate to its optimum. Also excludes mains borne interference.
High current and voltage output stage.
Will drive any power amp cable combination up to about 30 feet in length.

SPECIFICATIONS
| OUTPUT |
| Voltage RMS, maximum | > 27 Volts |
| Power, maximum | > 3.5 Watts |
Peak-to-peak output current | 0.3 Amps |
| Impedance | 50 Ohms |
| Frequency response | 20Hz to 20kHz ±0dB 10Hz to 100kHz +0, -2dB, |
| LINE INPUTS |
Total harmonic distortion and noise, 20Hz to 20kHz | > 0.006% (5 Volts output, maximum volume) |
Signal / noise reference for 1 Volt RMS output | 101dB ('A' weighted, at half volume) |
| Input sensitivity for 1 Volt RMS output | 240mV |
| Input impedance | 47k Ohms |
Gain at maximum volume | 12.5dB (4.2 times) |
| Overload margin | 31dB |
| Channel separation | > 85dB typical at 1kHz, maximum volume |
| PHONO INPUT |
Frequency response reference IEC RIAA | See graph below. |
Signal / noise reference for 1Volt RMS output | > 94dB Moving Magnet, ('A'-weighted, at half volume). |
| Input sensitivity for 1 Volt RMS output | > 83dB Moving Coil, ('A'- weighted, at half volume). |
| Input impedance | 2.5mV Moving Magnet. 350µV Moving Coil. |
| Overload margin | 47k Ohms 31dB |
| Inputs | Five pairs line level via RCA connectors. One pair phono MM / MC switchable via RCA connectors. |
| Outputs | One pair RCA connectors main output controlled by volume. One pair RCA connectors tape record line level output. |
| Power requirements | 100 / 115 / 230V AC 50 / 60Hz (factory preset). 20 watts maximum. |
| Weight | 12.5 kg (27.5 lbs) unit only, unboxed. 14.5 kg (31.9 lbs) in shipping carton. |
| Dimensions | 440mm (17.3) inches wide. 100mm, 3.9 inches high including feet. 410mm, 16.1 inches deep including terminals. |
| Standard accessories | IEC type mains lead. Remote control handset (universal type). Two batteries (AAA, MN2400, LR03). |
| RIAA Graph 
|